Advertisement
CARF-Models P-47
Accessories Required
• 8 high performance servos – (2) Ailerons, (2) Flaps, (1) Elevator, (1) rudder, (1) throttle,
(1) retracts. All servos used on flying surfaces should have a minimum of 200 in. ounce
torque – digital servos are highly recommended for their superior resolution and holding
power. Ball bearing outputs and metal gears are a MUST.
• Dual 2600 mah, 6v+ receiver batteries (minimum)
• Heavy Duty switches and servo extensions (22 gauge, minimum)
• PCM or 2.4 GHz radios are recommended for their superior rejection of engine ignition
noise and other 'RF' generated by large scale gas aircraft and hardware
• Scale Retractable Main Gear; Item Number: 270500
• 7" Main wheels (# 270550)
• Scale Retractable Tail Gear; Item Number: 270600
• Tail wheel (# 270650)
• Pneumatic completion pack for P-47; Item Number: 270800
• Moki 250 or 215 5 cylinder radial...OR
• 100cc to 120cc twin cylinder gas engine
• 1 liter (32 ounce) GASOLINE tank and GAS fuel line
Building Materials required
• 30 minute and 3 hr. epoxies
• Cut glass or MicroBalloons filler
• Thin and Thick CA glues
• Blue Loctite
@US
• Alcohol and lacquer thinner
• Standard modeling tools
Optional accessories
• CARF Fine Silver paint: Item #970024
• CARF Hardener: Item #970012
Scale detail resources
• Combat Legend P-47
Thunderbolt by Jerry
Scutts
• P-47 in Scale and Detail
by Bert Kinzey
• Scale Aviation Modeller
International; Volume 10,
Issue 2; Feb. 2004
• P-47 Thunderbolt in
Action; Squadron Signal
Publications
• P-47 Thunderbolt in
Action No. 208 by Larry
Davis; Squadron Signal
Publications
(thread locking compound)
www.carf-models.com
6
Advertisement
