Carf-Models P-47 Thunderbolt Instruction Manual page 100

CARF-Models P-47
www.carf-models.com
Using small metal tubes, rods or wooden dowels as a guide, drill through front canopy frame for
locating pins. The pins are then epoxied into place. Trim canopy clear plastic to fit.
IF painting canopy frames, do it BEFORE gluing clear plastic window material in place.
Always position and glue canopy parts with canopy in position. This assures proper fit.
Use RC-56 or other clear drying, water clean up, multi-purpose glue to adhere the
@US
clear plastic to canopy frames. A mixture of epoxy and cut glass can be used around the
plastic and canopy frame edge for a more solid bond if desired.
NOTE: Find Canopy addendum at end of manual
100