Advertisement
CARF-Models P-47
www.carf-models.com
Rudder / Tail wheel Servo
The rudder hardware pack is used to make the ball link attachment points at the rudder servo. The
tail wheel links are positioned outboard on the arm; rudder links on the inner holes. See photos:
Mount the rudder servo in the pre-installed tray using the provided servo screws. Feed one tail
wheel cable forward and through the ball link 'eyelet.' Grasping the excess cable from the tail
wheel opening, PULL the cable tight to create a bend in the cable. This provides a marker for
cable loop and length.
Tail wheel cable is
looped through eyelet
and pulled tight.
25
Advertisement
