Advertisement
CARF-Models P-47
www.carf-models.com
Fin retention Nut
The rudder clevises and eyelets are part of the rudder hardware pack. Assemble clevises, eyelets
and jam nuts as pictured (NOTE: included hardware may be slightly different than shown
)
@US
and attach to rudder horns. Trial fit rudder to fin using supplied rudder hinge pin. Remove the
rudder and drill two 10mm holes in the fin former for rudder cables.
Using the same method as shown and described previously, attach remaining two 130cm cables
to rudder clevis eyelets. Trial fit rudder, feeding cables forward to wing saddle opening and work
rudder to check for binding. If necessary, relieve rudder clevis openings with a round file such
28
Advertisement
