Advertisement
CARF-Models P-47
www.carf-models.com
NOTE: If 'C' clip is not located on the accessible side of air cylinder, be sure to remove and
reinstall pivot pin and C clip so that it is. This will allow easier cylinder replacement should it
ever be required.
'C' Clip should
be installed on
this side!
Completed gear door air cylinder
installation.
Check gear door for proper open/close using hand pump. Main gear must also be checked
for proper gear door clearance. NO RUBBING, NO TOUCHING! If it rubs on the ground,
it will HANG UP in FLIGHT!
TOUCH
NO
51
Advertisement
