Advertisement
CARF-Models P-47
www.carf-models.com
the stab and elevator and trial fit the elevator retention bolts into the CF torque rod to
verify correct angle of insertion and proper thread 'purchase.'
Equipment Tray
Locate the milled wood parts for the equipment tray. The tray mounting lugs are constructed
from the pre-milled parts as shown.
Side and top pieces are clamped then thick CA is used to glue side supports to top mount. Use
epoxy to glue top mount doublers. Epoxy is used liberally and parts are tightly clamped to allow
excess to squeeze into open spaces. Four mounts are constructed using the supplied wood parts.
Once epoxy is set, sand and set aside.
31
Advertisement
