Advertisement
CARF-Models P-47
www.carf-models.com
Air Outlet and Turbo-Supercharger Outlet Covers
Locate the Air Outlet and Turbo-supercharger outlet covers (Parts ID # 8 and #9). See the
following photos for correct placement. CA or epoxy can be used. Surfaces should be lightly
sanded and trial fit before applying adhesive. Some trimming of the parts may also be necessary
to achieve an excellent fit. Masking tape can be used to mark the proper positions and to hold in
place while glue sets.
Air Outlet (left) and Turbo-Supercharger Outlet (right) glued in place.
80
Advertisement
