Advertisement
CARF-Models P-47
www.carf-models.com
Engine Dome – Moki
Locate the carbon fiber engine mounting dome and engine hardware pack. The dome mounting
holes must be enlarged for the mounting bolts – the larger (7) bolts are for mounting the engine
and dome; the smaller (3) bolts are for mounting the cowl. The engine dome "TOP" is etched at
the factory – use a black marker to very clearly delineate the dome such that it will mount to the
firewall creating engine RIGHT THRUST.
Remove the two upper cowl mounting brackets so the dome can be mounted temporarily. The
'blind or T nuts' will be installed on the opposite side of the firewall in a later step. Remount the
cowl brackets and mark the areas of the dome that must be removed to clear the brackets. Use a
sanding tool to relieve the dome for brackets.
67
Advertisement
