Handset Screen - Furuno Felcom 250 Service Manual

2. Handset Screen

When an error is detected, the New SysMsg (x) popup screen will be displayed.
You can confirm the message contents by opening New SysMsg (x).
You can also confirm the Error message via; Main Menu -> SysMsg.
10 messages will be displayed at maximum, and even if the events causing the warning
or error messages are resolved, the message will stay displayed; they will be deleted
when you turn the power off.
These messages are multicasted from the Communication unit, and therefore the same
messages are displayed upon all Handsets registered.
Reference) What does the "Blip Blip" sound mean?
When an SMS is received or when a call was received but the Handset holder did not
respond to it, or when an Error message is detected, a popup message will be
displayed together with a "Beep" alarm sound.
If you wish not to have the Missed call and SMS received messages displayed, the
setting can be made via; Settings -> Basic -> Notify.
[Sys Msg]
AP2-2
Appendix 2. Message List