Connecting With Wan; Connecting With Wan From A - Furuno Felcom 250 Service Manual

5.1.3 Connecting with WAN

1. Connecting with WAN from a PC
When you intend to communicate via Standard IP data or Streaming IP data, open "Data
connection" from the Main menu, select the service you intend to communicate with,
and click Connect.
You can also connect with the networks for several different services concurrently, and
you can also connect with a phone call at the same time.
"P" will be displayed in the column for the service which had been connected first, and
you can use any application for that service.
You cannot connect with the same Application if it has already been connected with
some other service.
In such case, the following message will be displayed; "Can't connection. The
connection for same application has already been connected".
"P" will be displayed for
the service connected
first
When you wish to disconnect from the service, click Disconnect for the service you
intend to disconnect from.
"You are going to disconnect all connection. Continue?" will be displayed.
Note that if you click Disconnect for the service which had been connected first – the
service where "P" is displayed, you will be disconnected from all services.
"You are going to disconnect all connection. Continue?" message appears.
Connection cannot be
duplicated for the same
Application
5-6
5.1 WAN Settings