Furuno Felcom 250 Service Manual page 63

2.2 Web -> Settings -> Information
Item
Baud rate
Analog ports: Port1
Analog ports: Port2
Analog ports: Port3
Analog ports: Port4
Ringing pattern
Enabled service
Baud rate
Parity
Flow control
Own IP address
Subnet mask
DHCP
From
To
Static IP address
Checked
Default: 192.168.1.1
( )
Default: 255.255.255.0(24)
( )
Default: Use
( )
Default: 192.168.1.10
( )
Default: 192.168.1.254
( )
iii
Note
Settings -> Basic settings ->
GPS
Settings -> Basic settings ->
Analog port
Settings -> Basic settings ->
Incoming indicator
Settings -> Basic settings ->
Serial port
Settings -> Network settings
-> LAN -> IP address
Open "Lease information" upon
the screen shown above, and the
IP address whose status is set to
"Manual" is the Static IP address.
Check List