Furuno Felcom 250 Service Manual page 152

Register the extension number
and password for each Handset.
Settings -> SIP -> Client set
LAN port: 1 – 4
(RJ45)
Setting for the PBX settings.
Settings -> PBX settings ->
Extension, Incoming routing,
Call limit, Group
Settings -> Basic settings ->
Incoming indicator
Note) When you intend to connect the
Handsets or the Incoming indicator via
the SW HUB, the SW HUB will need to
be one of the PoE specifications.
Fig. 4.1.3 Connection port
Turn Dip SW #1 to
ON, and set to "PB"
Analog port: TEL1 - TEL4
TEL(Incoming indicator), FAX
(RJ11 x 2, Terminal x2)
Set the analog connection port service.
Settings -> Basic settings ->
Analog ports
4-6
4.1 Overview
System setting