Furuno Felcom 250 Service Manual page 157

2. Select from the Handset; Settings -> 2. Network -> Password -> 1. Automatic. The
message "Information Set" will be displayed.
The default value is "Automatic," Make this confirmation on each Handset.
Note)
The default password for the administrator is "01234567."
Reference)
If you open the "Manual" menu when "Automatic" is selected, "DHCP" will be
selected for both "IP obtain" and "DNS" as shown in the figure below.
If you open Manual,
Network
Auto
IP obtain
Manual
DNS
Table 4.3.1 The IP address setting on the Handset
Menu-1 Menu-2
Static IP
DHCP
Static
DHCP
4-11
4.3 Registering the Handset in the SIP Server
DHCP is selected
Menu-3
IP address
Subnet mask
Def. gateway
DNS(Primary)
DNS(Secondary)
Setup value
192.168.1.xxx
255.255.255.0
192.168.1.1
192.168.1.1