Furuno Felcom 250 Service Manual page 31

Factory-modification
From production in November 2010.
Details of improvements
1. Addition of Internal call routing capability
After incoming call, the calling party enter an extension number. And then the
incoming call can be routed to any internal phones.
No individual numbers were assigned on INMARSAT-FBB, not like INMARSAT-B
and F. Therefore, internal phones could not be called individually. The addition of
the capability is enabled any internal phones to be called by entering the
extension numbers.
Setting
(1) Select [PBX settings] -> [Internal call routing] from [Settings] in the menu bar on
Web MMI.
(2) Set the following items.
Operation
(1) Call to Voice (AMBE+2) of FELCOM 250/500. This capability can not be used
for Voice (3.1k Audio).
(2) Audio guidance is provided automatically and it guides to enter the extension
number.
(3) Enter 4 digit extension number of the calling party.
(4) The dialing extension number is called.
Audio Guidance
A. Please enter the 4-digit extension number. If you do not know the extension
number, please press the hash key.
B. You have dialed an unrecognized number.
C. The specified terminal is switched off or busy. Your call cannot be transferred.
D. Your call will be transferred to the default telephone.
- "Enable/Disable" function
- Audio guidance
（Japanese/English）
- Set timeout
2/5