Carburetor Removal - KYMCO SUPER 9 50 Service Manual

12
. CARBURETOR
SUPER 9 50
Groove
Install the throttle valve by aligning the
groove in the throttle valve with the throttle
stop screw.
Throttle Stop Screw
Carburetor Cap
Tighten the carburetor cap.
After installation, perform the following
adjustments and inspections.
• Throttle cable free play ( 3-12)
• Idle speed adjustment ( 3-11)
Install the met-in box.
Throttle Cable
Auto Bystarter Fuel Tube

CARBURETOR REMOVAL

Remove the met-in box. ( 2-3)
Remove the air cleaner by removing the air
cleaner band screw and attaching bolts.
Disconnect the fuel tube.
Loosen the drain bolt to drain fuel from the
carburetor.
Disconnect the auto bystarter wire
connector.
Drain Bolt Band
12-4