Canon iR8500 Service Manual page 808

E713
Main cause The connector has poor connection. The finisher accessory power supply
PCB is faulty. The finisher controller PCB is faulty. The DC controller PCB
is faulty.
Condition
0000 The communication IC (IPC) on the finisher controller PCB is out
E717
Main cause The wiring is faulty (short circuit, open circuit). The copy data controller or
the NE controller is faulty. The main controller PCB is faulty.
Condition
0000 The copy data controller or the NE controller is out of order, or the
Caution You must clear the error in service mode: COPIER>FUNCTION>CLEAR>
ERR.
E719
Main cause The wiring is faulty (short circuit, open circuit). The coin vendor is faulty.
The main controller PCB is faulty.
Condition
0002 The communication between the coin vendor and the main control-
Caution You must clear the error in service mode: COPIER>FUNCTION>CLEAR>
ERR.
E732
Main cause The cable connector has poor connection. The reader controller PCB is
faulty.
Condition
0001 The main controller PCB detects a fault in the communication be-
COPYRIGHT© 2001 CANON INC.
of order.
wiring has an open circuit.
ler PCB is interrupted.
tween the reader controller PCB and the main controller PCB.
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
ERROR CODE
E-33