Contacts; Figure 233 Snmp Test Page - Quantum DXi8500 User Manual

Figure 233 SNMP Test Page

Contacts

Quantum DXi8500 User's Guide
Test
The SNMP Test page allows you to send a test SNMP trap to verify that
SNMP is correctly configured on the DXi8500.
To access the SNMP Test page, on the SNMP page, click the Test tab
(see Figure 233).
To send a test SNMP trap, select a destination in the list and click Send.
If the destination does not receive the SNMP trap, make sure that the
destination IP address is correct (see
Also make sure that the community information is correct (see
Community on page 413).
The Contacts page allows you to enter company information. You can
also enter individual contact information for primary and secondary
contacts.
To access the Contacts page, click the Configuration menu, and then
click the Contacts tab.
Chapter 9: DXi8500 Configuration
Editing a Destination
Contacts
on page 412).
419