Logical View - Quantum DXi8500 User Manual

Logical View

Quantum DXi8500 User's Guide
Storage and I/E Slots
The Storage Slots and I/E Slots sections displays information about the
virtual cartridges located in the storage and I/E slots:
• The following information is displayed for each cartridge:
• Slot - The slot where the cartridge is located.
• Barcode - The barcode of the cartridge.
• WP - The write protect status of the cartridge.
• Capacity - The capacity of the cartridge.
• Used - The amount of space on the cartridge currently used to
store data. The value for Used might be less than the original,
native (raw) data size because the data is compressed before it
is written to the media.
• Used Percent - The amount of currently used space on the
cartridge expressed as a percentage of the total capacity
( [ Used / Capacity ] x 100 ).
• Click a cartridge to view detailed information about the cartridge.
• When the storage system is degraded, all tape cartridges are shown
in a degraded state.
• When the storage system has failed or is inaccessible due to failure,
all tape cartridges are shown as unavailable.
Use the Logical View page to view information about the virtual
(logical) components in a VTL partition. You can also view information
about used space in the partition.
To access the Logical View page, on the VTL page, click the Logical
View tab (see Figure 139).
Chapter 7: DXi8500 Status
245
VTL