Send Nas - Quantum DXi8500 User Manual

Send NAS

Quantum DXi8500 User's Guide
partition, it is restored on the source system just as it was at the point in
time when the snapshot was saved.
To perform a share or partition failback:
1 On the original source system, add the original target system to the
list of allowed replication sources (see
page 312).
Note: For the purposes of failback, the original source system is
now acting as a target because it will receive the snapshot
from the original target system.
2 On the original target system, select a received snapshot and
perform a failback operation pointing to the original source system,
and then recover the share or partition on the original source
system (see Performing a Failback For a Share
Performing a Failback For a Partition
The share or partition is now available on the original source
system.
3 (Optional) If necessary, map your backup application to the restored
share or partition on the original source system.
The Send NAS page allows you to manage outgoing replication activity
for NAS shares. You can replicate shares on the DXi8500 (the source) to
another DXi system that supports NAS (the target).
Note: Before you can replicate shares, you must specify the
replication target (see
To access the Send NAS page, click the Replication menu, and then
click the Send > NAS tab (see
Chapter 6: DXi8500 Replication
Replication Receive
on page 194 or
on page 208).
Replication Send on page 309).
Figure 100).
Send NAS
on
173