Notifications - Quantum DXi8500 User Manual

Chapter 9: DXi8500 Configuration

Notifications

Notifications
398
1 Under Upload Premium Feature Key (PFK) File, select an Array
module in the Storage Array drop-down box. The PFK will be
uploaded to this module (Qarray1 or Qarray2).
The following information displays:
• Qarray ID - The identification number of the Array module.
• Feature ID - The feature identification number of the Array
module.
• PFK Installed - The PFK status (No for not installed, or Yes for
installed).
Note: The Qarray ID and Feature ID are required to initially obtain
the PFK file. If a PFK is already installed, there is no need to
upload a PFK file.
2 In the PFK File Upload box, type the location and filename of the
PFK file. Or click the button to browse the system and locate the PFK
file.
Caution: If you are uploading more than one PFK file, check the
file names carefully, and make sure to upload the
correct file to each Array module.
3 Click Upload.
The PFK file is uploaded to the selected Array module. The module can
now be enabled for Data-at-Rest Encryption.
The Notifications page allows you to manage the methods the DXi8500
uses to send notifications. The DXi8500 can send notifications by e-mail,
or using SNMP (Simple Network Management Protocol).
To access the Notifications page, click the Configuration menu, and
then click the Notifications tab.
The Notifications page contains the following tabs:
Quantum DXi8500 User's Guide