Figure 231 Add Snmp Community Page - Quantum DXi8500 User Manual

Figure 231 Add SNMP
Community Page
Quantum DXi8500 User's Guide
Note: If no communities are defined, the SNMP agent is not
accessible.
To add a community:
1 Click Add.
The Add SNMP Community page displays (see
2 In the Name box, enter a unique Name for the community (up to
20 characters).
Valid characters are letters, numbers, hyphens, and underscores.
3 Enter a valid IP Address and Network Mask pair.
A pair is valid if performing a logical bitwise AND operation on the
IP address and the network mask results in the IP address. See the
table below for examples:
IP Address / Network Mask
10.40.166.87
255.255.255.255
10.40.166.87
10.40.166.87
Chapter 9: DXi8500 Configuration
Figure 231).
Result
Allows access only from
10.40.166.87
Allows access only from
10.40.166.87
Notifications
415