RAID
Figure 134 RAID Page
Quantum DXi8500 User's Guide
• Values that exceed the maximum value of the vertical axis are
shown in lighter green.
• Each bar on the graph represents approximately 1 second of time.
• Hold the cursor over a bar to display the value of the bar.
The RAID page allows you to view throughput performance for RAID
read and write activity.
To access the RAID page, on the Performance page, click the RAID tab
(see
Figure
134).
Use the RAID page to display recent RAID activity in dynamic graphs:
• The top graph reports data reads and the bottom graph reports
data writes.
• The horizontal axis displays time (0–100 seconds).
• The vertical axis displays the amount of data read or written (100
OPS/s).
Chapter 7: DXi8500 Status
Performance
237