Figure 104 Edit Vtl Partition Page - Quantum DXi8500 User Manual

Chapter 6: DXi8500 Replication
Send VTL
Figure 104 Edit VTL Partition
Page
186
The Edit Partition page displays (see
2 Select the Enable replication check box to enable replication for
the partition.
Or clear the Enable replication check box to disable replication for
the partition.
3 Click Apply.
Note: Quantum recommends scheduling replication to run after
backups are complete (see
Replication on page 358). If you do not enable scheduled
replication, replication will only occur if you manually replicate
a partition (see
configure Cartridge Based Replication (see
Source Partition for Cartridge Based Replication
Note: Disabling replication for a partition does not delete any
scheduled replication events for that partition. If you no longer
want to schedule the partition for replication, manually delete
the schedule (see
Figure
Scheduling a Share or Partition for
Replicating a Partition
Deleting a Scheduled Event
Quantum DXi8500 User's Guide
104).
on page 188) or if you
Configuring a
on page 187).
on page 363).