Receive Nas; Received Snapshots - Quantum DXi8500 User Manual

Receive NAS

Received Snapshots

Quantum DXi8500 User's Guide
The Receive NAS page allows you to manage incoming replication
activity for NAS shares. You can recover a replicated share on the target
system if the source system is unavailable. Once the source system
becomes available, you can failback the share to make it available on
the source system again.
Note: Before you can receive replicated shares, you must specify one
or more replication sources (see
page 312).
To access the Receive NAS page, click the Replication menu, and then
click the Receive > NAS tab.
Use the Receive NAS page to perform the following tasks:
• View received snapshots and recover, failback, or delete snapshots
(see Received Snapshots
• Manage recovery jobs (see
• Manage failback jobs (see
• Manage shares configured for Directory/File Based Replication (see
Directory/File Based
The Received Snapshots page allows you to view and work with
received snapshots. When a replicated NAS share is received from a
source system, it is saved as a snapshot. The snapshot contains all of the
data necessary to fully recover or failback the share to the point in time
when the snapshot was saved.
To access the Received Snapshots page, on the Receive NAS page, click
the Received Snapshots tab (see
Chapter 6: DXi8500 Replication
Replication Receive
on page 191).
Recovery Jobs
Failback Jobs on page 198).
on page 199).
Figure 106).
Receive NAS
on
on page 197).
191