Fc Initiators And Targets; Figure 198 Fc Initiators And Targets Page - Quantum DXi8500 User Manual

Chapter 9: DXi8500 Configuration
PTT
FC Initiators and
Targets
Figure 198 FC Initiators and
Targets Page
To change the port type, select
the port and click Edit
352
The FC Initiators & Targets page allows you to see all path to tape
initiator and target ports and their associated World Wide Port Numbers
(WWPNs). You can also change a Fibre Channel port to initiator or target
mode.
To access the FC Initiators & Targets page, on the PTT page, click the FC
Initiators & Targets tab (see
Use the FC Initiators & Targets page to perform the following tasks:
• View information about initiator and target Fibre Channel ports (see
Fibre Channel Initiators and Targets List
• Change the mode of a Fibre Channel port (see
Channel Port Type
Fibre Channel Initiators and Targets List
The Fibre Channel Initiators & Targets section displays the following
information for all Fibre Channel ports:
• Alias - The alias of the Fibre Channel port.
• WWPN - The World Wide Port Number of the Fibre Channel Port.
Figure 198).
on page 353).
on page 352).
Editing the Fibre
Quantum DXi8500 User's Guide