Figure 56 Login Window - Quantum DXi8500 User Manual

Figure 56 Login Window

Quantum DXi8500 User's Guide
If the Login window does not display, verify that the IP address is
correct and that the network path to the DXi8500 is valid. Also
verify that you are using a supported Web browser. Then try again.
If you are still unable to access the Login window, contact your
DXi8500 administrator.
Note: The default IP address is 10.1.1.1. The IP address can be
changed during installation using the Getting Started
Wizard or at a later time on the Network page (see
Network on page 366).
3 Select the login type and enter the corresponding password.
• Monitor - Allowed to view information on the DXi8500 remote
management console but cannot make changes. (The default
password is password.)
• Administrator - Allowed to view and change information on
the DXi8500 remote management console. (The default
password is password.)
Note: Passwords are limited to 15 characters. All alphanumeric
characters are allowed, as well as underscores ( _ ) and
hyphens ( - ). Passwords can be changed on the Web & CLI
Passwords page (see
4 Click Login.
Chapter 3: DXi8500 Remote Management
Accessing Remote Management
Web & CLI Passwords on page 384).
101