Figure 22 System Node - Nic Indicators; Table 4 System Node - Nic Indicator Codes - Quantum DXi8500 User Manual

Chapter 2: Basic Operations
DXi8500 Components and Operations
Figure 22 System Node – NIC
Indicators
Table 4 System Node – NIC
Indicator Codes
Indicator
Link and activity indicators are off.
Link indicator is green.
Link indicator is amber.
Activity indicator is green blinking.
44
System Node – NIC Indicator Codes
This section describes the DXi8500 System Node NIC indicator codes.
1
1 Link indicator
2 Activity indicator
Indicator Code
The NIC is not connected to the network.
The NIC is connected to a valid network link at 1000 Mbps.
The NIC is connected to a valid network link at 10/100 Mbps.
Network data is being sent or received.
System Node – Power Indicator Codes
The power supplies have indicators that show whether power is present
or whether a power fault has occurred.
• Not lit – AC power is not connected.
• Green – In standby mode, a green light indicates that a valid AC
source is connected to the power supply and that the power supply
is operational. When the system is on, a green light also indicates
that the power supply is providing DC power to the system.
• Amber – Indicates a problem with the power supply.
2
Quantum DXi8500 User's Guide