Figure 213 Date & Time Page - Quantum DXi8500 User Manual

Figure 213 Date & Time Page
Quantum DXi8500 User's Guide
To set the system date and time:
1 Select one of the following options:
• Network Time Protocol (NTP) Server - (Recommended) Select
this option to synchronize the DXi8500 with an NTP timeserver
or pool. Then select or specify a timeserver or pool.
• Select a Timeserver Pool - (Recommended) Select one of
the well-known, geographically-based NTP timeserver pools
in the drop-down box.
Note: To select a timeserver pool, you must first specify
at least one DNS IP address on the Network page
(see
specify the IP address of the timeserver pool.
• Specify a Timeserver or Pool - Type the name or IP address
of the NTP server or pool. (See
information about publicly available NTP servers)
To verify that the DXi8500 can communicate with the NTP server
or pool, click Test NTP.
• Manual Date & Time Settings - Select this option to manually
set the system date and time.
Specify the New System Date by clicking the calendar icon.
Specify the New System Time using the drop-down boxes.
Chapter 9: DXi8500 Configuration
Network on page 366). Otherwise, you must
http://support.ntp.org
System
for
383