Figure 168 Media Unload Page - Quantum DXi8500 User Manual

Figure 168 Media Unload Page

Quantum DXi8500 User's Guide
To unload virtual tape cartridges:
1 In the Partition drop-down box, select the partition that contains
the cartridges to unload.
2 If the partition is online, click Offline to take the partition offline. To
unload media, the partition must be offline.
3 In the Show Location drop-down box, select the type of location
you want to unload cartridges from (Drive, I/E Slot).
4 (Optional) If you are unloading cartridges from a drive, select the
Force Unload (Virtual Tape Drives) check box to force drives to
unload the cartridges before ejecting them.
5 (Optional) To reduce the number of cartridges displayed in the table,
enter a barcode or barcode range in the Barcode Filter box and
click Apply Filter.
Use a hyphen (-) to indicate a range, and use an asterisk (*) to
indicate a wildcard. Separate multiple entries with commas, and do
not use spaces.
For example, enter AAA* to display all cartridge barcodes beginning
with AAA. Or enter AAA010-AAA020 to display all barcodes in the
specified range. Click the Quick Tip icon [?] for additional examples.
6 Select the cartridges to unload.
Chapter 9: DXi8500 Configuration
VTL
299