Fc/Iscsi Bridge; Table 23 Native Fibre Channel Configuration Options - Quantum PX500 Series User Manual

Table 23 Native Fibre Channel
Configuration Options

FC/iSCSI Bridge

Quantum PX500 Series User's Guide
The media changer or tape drive configuration screen displays. Refer
to table 23
Configuration Option
Configured Speed
Configured Topology
Loop ID
This section allows users manage the FC1202 Fibre Channel bridge(s) or
3
TC2201 iSCSI bridges installed in the cabinet.
The FC or iSCSI bridge information only displays when a Fibre
Note:
Channel or iSCSI bridge is installed in the library.
1 To access the
FC/iSCSI Bridge
The
FC/iSCSI Bridge
Chapter 3 Quantum PX500 Series Remote Management
for configuration options.
page, from the
FC/iSCSI Bridge
tab at the top of the page.
page displays (see
Description
Select 1 G, 2 G, or Auto negotiate
to set the configured speed
Select point-to-point, arbitrated
loop, or Auto negotiate to set the
configured topology.
Select the loop ID. The loop ID
can only be set when the
configured topology is set to
arbitrated loop.
page, click on the
Setup
figure 77).
Setup
114