Right-Hand Doors - Intermec EasyCoder PF2i Service Manual

Chapter 3—Covers and Doors

3.1 Right-Hand Doors

EasyCoder PF2i
EasyCoder PF4i
EasyCoder PF4i Compact Industrial
42
The EasyCoder PF2i comes with two types of right-hand doors, the Easy-
Coder PF4i with three types, and the EasyCoder PF4i Compact Industrial
with two types:
• A long door the entirely encloses the media compartment and print
mechanism. The long door protects the media, but restricts the diameter
of the media roll to maximum 152 mm (6 inches).
• A short door that only encloses the print mechanism, but leaves the
media compartment open for easy access. The short door is used in con-
nection with quick-load guides, or when an extra large media roll is used
without any need for full enclosure. Maximum diameter of the media
roll is 203 mm (8.00 inches).
• A short door that only encloses the print mechanism, but leaves the
media compartment open for easy access. The short door is used in con-
nection with quick-load guides, or when an extra large media roll is used
without any need for full enclosure. Maximum diameter of the media
roll is 203 mm (8.00 inches).
• A long door the entirely encloses the media compartment and print
mechanism. The long door protects the media, but restricts the diameter
of the media roll to maximum 152 mm (6 inches).
• A long door with a hinged transparent canopy (Megatop) that can
accommodate an internal 8-inch media roll. Maximum diameter of the
media roll is 213 mm (8.38 inches).
• A long door the entirely encloses the media compartment and print
mechanism. The long door protects the media, but restricts the diameter
of the media roll to maximum 152 mm (6 inches).
• A long door with a hinged transparent canopy (Megatop) that can
accommodate an internal 8-inch media roll. Maximum diameter of the
media roll is 213 mm (8.38 inches).
All right-hand doors are made of magnesium and hinged to the bottom
plate. EasyCoder PF2i and PF4i have plastic hinges to which the doors can
be snap-locked, whereas EasyCoder PF4i Compact Industrial has metal
hinges permanently affi xed to the side doors and screwed to the bottom
plate. The rear part of the Megatop always has plastic hinges. The doors
can be folded down 180˚ to a vertical position, while the Megatop trans-
parent canopy is folded backward after the side door has been opened. The
doors are kept shut by a magnetic lock glued to the top of the front/left
hand cover.
Intermec EasyCoder PF2i, PF4i, and PF4i Compact Industrial—Service Manual