Intermec EasyCoder PF2i Service Manual page 113

Intermec EasyCoder PF2i, PF4i, and PF4i Compact Industrial—Service Manual
IPL only
In IPL, the media feed is affected by the mode of operation. There are
three such modes:
• Tear-off (straight-through)
(default)
• Peel-off (self-strip)
(enabled/disabled by <STX><SI>T n <ETX> command)
• Cut-off
(activated/deactivated when the cutter is enabled/dispabled in the Setup
Mode or by <STX><SI>C n <ETX> command)
Each mode has a fi xed amount of media feed, which can be fi ne-adjusted
using the Label Rest Point parameter in the Setup Mode (See Appendix A,
Setup/Media/Lbl Rest Point) or an <STX><SI>f n <ETX> command.
The type of detection is decided by the Media Type parameter in the Setup
Mode (See Appendix A, Setup/Media/Media Type).
Chapter 7—Print Mechanism
105