Intermec EasyCoder PF2i User Manual
  1. Manuals
  2. Brands
  3. Intermec Manuals
  4. Printer
  5. EasyCoder PF2i
  6. User manual
Intermec EasyCoder PF2i User Manual

Intermec EasyCoder PF2i User Manual

Bar code label printer (fingerprint version)
Hide thumbs Also See for EasyCoder PF2i:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, User Manual
User's Guide
EasyCoder PF2i
Bar Code Label
Printer
(Fingerprint Version)

Advertisement

Table of Contents
loading

Related Manuals for Intermec EasyCoder PF2i

Summary of Contents for Intermec EasyCoder PF2i

  • Page 1 User’s Guide EasyCoder PF2i Bar Code Label Printer (Fingerprint Version)
  • Page 2 User’s Guide EasyCoder PF2i Bar Code Label Printer (Fingerprint Version)
  • Page 3 Intermec Technologies Corporation. Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation. © 2004 - 2008 by Intermec Technologies Corporation. All rights reserved.
  • Page 4 Intermec Shell v8.1. Information on Intermec Ready-To-Work Indicator added. New setup node for LSS test added. More bar codes supported. -001 3/2008 Revised P/N 1-960578-02 to 934-033-001. Bring into Adobe FrameMaker 8.0. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 5 EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 6: Table Of Contents

    Description of EasyCoder PF2i printer ........
  • Page 7 Feed Adjust ..........55 EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 8 Intermec Shell v8.1 Overview ........
  • Page 9 Intermec Ready-To-Work Indicator ........
  • Page 10 Recommended Paper Type Settings (North America) ..... . . 156 EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 11 Contents EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 12: Before You Begin

    ESD guidelines to avoid damaging the equipment you are servicing. Note: Notes either provide extra information about a topic or contain special instructions for handling a particular condition or set of circumstances. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 13: Global Services And Support

    Order spare Order spare parts. 1 or 2 and then parts choose 4 Technical Talk to technical support 2 and then choose 2 Support about your Intermec product. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 14: Service Location Support

    Contact: Mr. Sinbum Kang Telephone: +82-31-436-1191 E-mail: mjyun@awoo.co.kr IN Information System PTD LTD 6th Floor Daegu Venture Center Bldg 95 Shinchun 3 Dong Donggu, Daegu City, Korea E-mail: jmyou@idif.co.kr korlim@gw.idif.co.kr EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version) xiii...

  • Page 15: Who Should Read This Manual

    This manual provides you with information about the features of the EasyCoder PF2i printer, and how to install, configure, operate, maintain, and troubleshoot it. Before you work with the EasyCoder PF2i printer, you should be familiar with your network and general networking terms, such as IP address.

  • Page 16: Introduction

    Introduction This chapter introduces the EasyCoder PF2i printer. The chapter covers the following topics: • Description of EasyCoder PF2i printer • Safety Summary • Product Identification EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 17: Description Of Easycoder Pf2I Printer

    (203.2 dots per inch) and a maximum print width of 56 mm (2.2 inches). Optionally, it can be provided with a thermal transfer mechanism. The EasyCoder PF2i printer offers a large number of useful features, such as: • Flash memory SIMMs for firmware, fonts, bar codes, and application programs •...

  • Page 18: Safety Summary

    The machine label is attached to the printer’s rear plate and contains information on type, model, and serial number as well as AC voltage. It also contains various signs of approval. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 19 Chapter 1 — Introduction EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 20: Installation

    PF2i printer and also describes the printer’s various parts in detail. It covers the following topics: • Front View • Rear View • Media Compartment • Print Mechanism • Connections • Controls and Indicators EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 21: Front View

    The printed labels, tickets, or tags are presented at the front of the print mechanism. Indicator lamps Display window Keyboard Print button Print mechanism Side door EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 22: Rear View

    Ethernet connection (option) Memory card slot Provision for one optional interface board On/Off switch Bar code wand socket AC power cord socket RS-121 serial interface (”uart1:”) USB interface (”usb1:”) Machine label EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 23: Media Compartment

    The media supply can be from a supply post, or from an external supply of fan folds behind the printer. There is also an optional rotating media supply hub. Also see “Media Supply Hub” on page 91. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 24 Long side door The EasyCoder PF2i printer uses a media supply roll post that can be fitted in three different positions inside the media compartment. The position depends on the type of side door (long or short) and whether or not the printer is fitted with an integral liner takeup.

  • Page 25: Media Supply Roll Post

    (optional). These slots allow the largest possible roll size to fit, given the limitations of any liner takeup and/or the full enclosure provided by the long side door. The positions are indicated by numbers engraved in the center section. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 26 (8.38 inches). • Position 4 is not used. The printer can also use an external media supply located behind the printer. Position 3 Position 2 Position 1 Position 4 (not used) EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 27: Print Mechanism

    Media supply roll post with edge guide Print mechanism Optional integral liner takeup with guide shaft Long side door EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 28: Connections

    3 Connect the power cord from the socket on the rear plate to an electrical outlet (90 to 265 VAC). Computer The EasyCoder PF2i printer is fitted with one 9-pin D-style subminiature (DB9) socket for the RS-232 serial interface port (see “Interfaces”...

  • Page 29: Controls And Indicators

    The indicators are colored LEDs (Light Emitting Diodes) and are used for the following purposes: Power (solid green) indicates that the power is on. Status (solid green) indicates that the printer is ready for use. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 30: Display

    The keyboard is of the membrane-switch type and has 22 keys. The keyboard is supplemented by a large Print button on the printer’s front. Some keys have hard-coded functions in the startup and setup modes: EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 31 Since one key is assigned as shift key, up to 44 different key combinations are possible. An audible signal, which can be turned off if so desired, acknowledges that a key has been pressed. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 32: Beeper

    The frequency and duration of signals can be specified. Thus it is possible to create different signals for different conditions or even to make the printer play simple melodies! EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 33 Chapter 2 — Installation EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 34: Starting Up

    This chapter explains how to start up the printer after installation or after the printer has been switched off. It covers the following topics: • Startup Files • Memory Cards • Switching on the Printer • Display Messages at Startup EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 35: Startup Files

    • In addition to Intermec Shell, the printer is also fitted with a custom made application program that is design to perform a specific task, for example to print tickets, baggage tags, or product labels for a certain company.
  • Page 36 Note: Always switch off the power before inserting or removing a memory card! The card will only fit in one way. A memory card is only detected if it is inserted before the printer is started. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 37: Switching On The Printer

    Refer to “Intermec Shell Startup Program” on page 79 for more information on Intermec Shell. The digits in the lower right corner of the display indicate the version of Intermec Shell. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 38 Chapter 3 — Starting Up B. Custom-Made Application Program Any other display messages than those illustrated above indicates that the printer is running some custom-made, non-standard application program, or that some error has occurred. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 39 Chapter 3 — Starting Up EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 40: Media Load

    This chapter explains how to load the printer with media, that is labels, tickets, tag, or strips, for the following modes of operation: • Tear-Off (Straight-Through) • Tear-Off with Quick-Load (Straight-Through) • Peel-Off (Self-Strip) • External supply (Fan-Folds) EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 41: Tear-Off (Straight-Through)

    Chapter 4 — Media Load Tear-Off (Straight-Through) The EasyCoder PF2i printer can print on labels, tickets, tags, and continuous stock in various forms. This section describes the case when the media is torn off manually against the printer’s tear bar.
  • Page 42 3 Remove any empty core from the media supply roll post. 4 Fit new roll of media on the supply post and adjust the edge guide, so the roll becomes flush with the center section. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 43 5 Route the media through the print mechanism. Then push it inwards as far as it will go. 6 This diagram shows the media path. 7 Turn the printhead lift lever counterclockwise to engage the printhead. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 44 8 Adjust the position of the green edge guide, so the media is guided with a minimum of play. 9 Close the side door. 10 Press the Feed button to advance the media and adjust the media feed. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 45: Tear-Off With Quick-Load (Straight-Through)

    In addition to the media load procedure for tear-off (straight- through) operation described earlier in this chapter, the EasyCoder PF2i printer can optionally be fitted with a set of quick-load guides that makes media load much easier and quicker, especially if the printer has a short side door. See “Adjustments”...
  • Page 46 2 Fit a new roll of media on the supply post and adjust the edge guide, so the roll becomes flush with the center section. 3 If necessary, adjust the outer quick-load guide to fit the width of the media. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 47 5 Keep pushing the media forward while pressing the Feed button. 6 To tear off the media, grab the outer edge and pull downwards. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 48: Peel-Off (Self-Strip)

    Chapter 4 — Media Load Peel-Off (Self-Strip) The EasyCoder PF2i printer can print on labels, tickets, tags, and continuous stock in various forms. This section describes the case when self-adhesive labels are separated from the liner immediately after printing. The liner is then wound up on an integral liner takeup hub.
  • Page 49 1 Open the side door. 2 Turn the printhead lift lever clockwise to raise the printhead. 3 Pull out the handle to collapse the takeup hub, then remove any liner. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 50 4 Remove an empty core from the media supply roll post. 5 Fit a new roll of labels on the supply post and adjust the edge guide, so the label roll becomes flush with the center section. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 51 Route the liner through the print mechanism and push it inwards. 7 Route the liner around the tear bar and the liner drive roller and back under the print mechanism and guide shaft. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 52 9 Press the handle to expand the takeup hub and secure the liner. Then rotate the hub counterclockwise until the liner becomes tight. 10 This diagram shows the media and liner paths. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 53 11 Turn the printhead lift lever counterclockwise to engage the printhead. 12 Adjust the position of the green edge guide, so the media is guided with a minimum of play. 13 Close the side door. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 54: External Supply (Fan-Fold)

    14 Press the Feed button to advance the media and adjust the media feed. External Supply (Fan-Fold) The EasyCoder PF2i printer can print on labels, tickets, tags, and continuous stock in various forms. This section describes the case when the media supply is placed behind the printer, usually in the form of fan-folded tickets or tags.
  • Page 55 Chapter 4 — Media Load This diagram shows the media path from an external supply. In case of the standard edge guide (as opposed to quick-load guides), turn it to the vertical position. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 56: Thermal Transfer Printing

    Thermal Transfer Printing This chapter explains how to load the printer with ribbon for thermal transfer printing when the printer is fitted with an optional transfer ribbon mechanism. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 57: Ribbon Load

    Chapter 5 — Thermal Transfer Printing Ribbon Load The EasyCoder PF2i printer can print on labels, tickets, tags, and continuous stock using either direct thermal printing on special heat-sensitive media or thermal transfer printing using a special ink-coated ribbon. For thermal transfer printing, the printer must be fitted with a transfer ribbon mechanism.
  • Page 58 1 Open the side door. 2 Turn the printhead lift lever clockwise to raise the printhead. 3 In case of ribbon reload, remove any used ribbon and empty ribbon core. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 59 4 Unpack a roll of original Intermec thermal transfer ribbon. 5 Slide the ribbon roll onto the supply hub, so the ink-coated side faces down when the ribbon is routed through the print mechanism. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 60 6 Route the ribbon through the print mechanism and pull out approximately 20 cm (8 inches) of ribbon. 7 Without releasing the ribbon, turn the printhead lift lever counterclockwise to engage the printhead and lock the ribbon. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 61 8 Slide the empty cardboard core onto the ribbon rewind hub, so the ribbon is wound up when the hub rotates counterclockwise. 9 Turn the printhead lift lever clockwise to raise the printhead and release the ribbon. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 62 10 Manually advance the ribbon until all of the transparent leader has passed the printhead and the ribbon becomes tight. 11 Turn the printhead lift knob counterclockwise to engage the printhead. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 63 Chapter 5 — Thermal Transfer Printing 12 Close the side door. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 64: Setting Up The Printer

    Setup Mode or in the various application programs to configure the printer for the user’s specific requirements. It covers the following topics: • Description • Default Setup • Setup Parameters EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 65: Description

    Setup Mode • Press the Setup key on the printer’s built-in keyboard to enter the Setup Mode. • Select the Setup option in Intermec Shell to enter the Setup Mode. • Execute the Intermec Fingerprint SETUP instruction to enter the Setup Mode.

  • Page 66: Default Setup

    Width Label length 1200 Media type Label (with Gaps) Paper type Direct Thermal Label Constant Label factor Contrast ±0% Configuration Print speed 100 mm/sec. Feed Adjust Start adjust Stop adjust EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 67: Reading The Current Setup

    Setup Mode. You can list the printer’s current setup values by printing test label “Setup Info” in the Setup Mode or by using Intermec Shell. The current setup values can be sent to the host via the standard serial communication channel using a SETUP WRITE "uart1:"...

  • Page 68: Data Bits

    RTS/CTS is a protocol where the communication is controlled by currents through separate lines in the cable being set either to high or low. By default, this option is disabled. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 69: New Line

    • CR/LF ASCII 13 + 10 dec. (default) • LF ASCII 10 dec. • CR ASCII 13 dec. Receive Buffer The receive buffer stores the input data before processing. Default size is 1024 bytes. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 70: Transmit Buffer

    • A negative stop adjustment means that the normal media feed after the printing is completed will be decreased by the specified value. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 71: Recommended Feed Adjustments

    By increasing the value for the X-Start parameter, the origin will be moved outwards, away from the inner edge of the media path. In other words, the larger X-Start value, the wider inner margin and the less available print width. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 72 Any object or field extending outside the print window in any direction will either be clipped or cause an error condition (Error 1003 “Field out of label”), see Intermec Fingerprint v8.xx, Command Reference Manual. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 73: Media Type

    • Var length strip is used for continuous stock. The size of the print image decides the length of each copy. It is important to select the correct media type, so the printer can indicate the following errors. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 74: Paper Type

    • Thermal Transfer printing (option) Your choice will decide which parameters to enter next: Direct Thermal Printing • Label Constant (range 50 to 115) • Label Factor (range 10 to 50) EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 75 The Label Offset parameter is presently not used, so keep it at the default value 0. General Paper Type Settings Guide (Thermal Transfer) Ribbon Ribbon Max. Print Type Constant Factor Speed Wax (Europe) Wax (U.S.A.) EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 76: Contrast

    11 options are displayed in an endless loop from -10% to +10%. Default value is 0%. The contrast is reset to the default (±0) whenever a new paper type is specified, regardless which method has been used. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 77: Testfeed

    If the printer refuses to print a test label, press the i key to fi nd out what is wrong, for example “printhead lifted” or “out- of paper”. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 78 Chapter 6 — Setting Up the Printer Test Labels 706 ohms/8 dots Diamonds Chess Bar Codes #1 Bar Codes #2 Setup Info (1/2) Setup Info (2/2) Hardware Info EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 79: Print Speed

    The sensitivity of the LTS can be tested and adjusted as described “Adjustments” on page 115. Returning to Factory Default Setup There are two ways to return to the factory default setup of the printer: EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 80 To reset the printer using the keyboard: 1 Lift the printhead. 2 Switch on the power to the printer and press the i/F5 key and wait until the printer beeps. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 81 This means that EasyLAN Wireless settings (SSID, keys, etc.) will retain their values from the previous start. However, the next reboot will reset them to factory default. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 82: Setup Mode

    This chapter describes how to enter the setup mode at installation, explains how to navigate in the setup mode, and provides overviews over which parameters and messages are available for the standard printer and with various interface boards. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 83: Entering Setup Mode At Installation

    Normally, there is no need to enter the Setup Mode when using application programs that start up automatically. Necessary provisions for changing the setup, manually or automatically, should be provided by the program. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 84: Navigating In Setup Mode

    Acknowledge and move to next menu or perform test feeds in the Testfeed menu, or print test labels in the Test label menu. Exit the Setup Mode. Can be used anywhere in Setup Mode. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 85 M E D I A Option E T U P : E T U P : N E T W O R K F E E D A D J Option EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 86: Setup Mode Overviews

    E A B L E Scroll forward Scroll forward Scroll back Scroll back Legend: Dotted boxes and lines indicate options. Thick boxes indicates default options. Values inside brackets indicate default settings. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 87 T O P A D J : T A R T A D J : T O P A D J : [ 0 ] : [ 0 ] : EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 88 [ 4 0 ] : - 6 % O N T R A S T : - 4 % O N T R A S T : - 2 % Scroll forward Scroll back EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 89 E N E R O S O P [ 1 0 ] : S E N S I I V I Y 1 0 O U O F 9 - 1 0 EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 90 [ 1 0 2 4 ] : R S 2 3 2 [ 1 ] : Only displayed in case of Read-only RS485 on "uart2:". Enter printer’s protocol address (0–31). EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 91 S E R - C O M , U A R T 3 : C O E C T E D H W C O E C T E D H W : R S 2 3 2 Read-only EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 92 M A C A D D R E S S M A C A D D R E S S : 0 0 1 0 4 0 1 7 b 8 0 e EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 93 Chapter 7 — Setup Mode EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 94: Intermec Shell Startup Program

    Intermec Shell Startup Program This chapter describes the Intermec Shell Startup program and covers the following topics: • Introduction • Starting with Intermec Shell • Intermec Shell Overview • Line Analyzer EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 95: Introduction

    Chapter 8 — Intermec Shell Startup Program Introduction Intermec Shell is a startup program, which is a program that automatically starts running when the printer is switched on. Intermec Shell helps the operator to choose between a number of standard or custom-made application programs and to start certain useful facilities, as listed below.

  • Page 96: Starting With Intermec Shell

    (device "/c"), this startup file will be used instead of Intermec Shell (see “Startup Files” on page 20).
  • Page 97 • LINE-AXP.PRG (Line Analyzer) is a Fingerprint program that captures characters received by the printer on a communication channel and prints them on labels. • Other Application Programs will presented as additional options. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 98 CompactFlash memory card or to upgrade the printer’s firmware. The following options are available: • Update CompactFlash card allows the printer to be used as a CompactFlash card programming device. Any files can be EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 99 Firmware upgrade files can be found on www.intermec.com or be obtained from your local Intermec distributor. Reboot Corresponds to cycling the power to the printer. To exit Intermec Shell without having selected any application, select Reboot. Then wait for the 5 seconds countdown to finish, and the last selected application will be opened.

  • Page 100: Intermec Shell V8.1 Overview

    SHELL UPDATE: TRANSFER FILE SOFTWARE UPDATE COMPACT FLASH? USING ZMODEM TRANSFER COMPLETED SHELL UPDATE: TRANSFER FILE REBOOT FIRMWARE? USING ZMODEM Printer rebooted Restarts the printer (same as power off/on) automatically. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 101: Line Analyzer

    Line Analyzer Sel.port(1-6) 1 Enter the desired communication port using the numeric keys on the printer’s keyboard: 1 = "uart1:" 2 = "uart2:" 3 = "uart3:" 4 = "centronics:" EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 102 6 = "usb1:" If the printer is not fitted with the specified port, an error message appears in the display and you can select another port: Line Analyzer Error: 56 EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 103 Chapter 8 — Intermec Shell Startup Program EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 104: Options

    This chapter describes the options available for the EasyCoder PF2i printer. The options can be factory installed, field-installed by an authorized service technician, or in some cases installed by the operator. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 105: Introduction

    The EasyCoder PF2i printer provides a high degree of flexibility because it has a modular design. By adding options to the basic printer, the EasyCoder PF2i printer can be adapted for a variety of applications. Most options can easily be installed by the...

  • Page 106: Transfer Mechanism

    It allows the use of both direct thermal and thermal transfer supplies. Side Doors The EasyCoder PF2i printer comes with either a short side door, which only covers the print mechanism or with a long side door, which encloses the entire media compartment. The long side door has a slot for external media supply.

  • Page 107: Real Time Clock

    EasyLAN boards: • EasyLAN Ethernet interface • EasyLAN Wireless interface Other communication boards: • Parallel Interface Board (IEEE 1284) • Double Serial Interface Board • Serial/Industrial Interface Board EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 108: Troubleshooting

    Troubleshooting This chapter describes how the Intermec Ready-To-Work Indicators work. It also lists various possible cases of inferior printout quality, describes possible causes, and suggests remedies. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 109: Intermec Ready-To-Work Indicator

    Head lifted Blink 1022 Cutter does not Blink 1059 respond Cutter error1 Blink 1701 Cutter error2 Blink 1702 Cutter error3 Blink 1703 Cutter open Blink 1704 LSS too high Blink 1007 EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 110 “IP SELECTION” to “MANUAL” and “IP ADDRESS” to “0.0.0.0”. This will indicate that the user does not regard the lack of network connection as an error. Note 3: No trap can be sent when this error/event occurs. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 111 In this case, it is up to the application to set the status. Note 9: At most, but not all, printer crashes, the console is reset. This will make the IRI go off. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 112 Poor media or Select a better “Intermec ribbon quality brand of media/ Supplies” on ribbon page 151 Worn printhead Replace “Printhead printhead Replacement” on page 109 EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 113 Cleaning” on page 102 White vertical Printhead dirty Clean “Printhead lines printhead Cleaning” on page 102 Missing Replace “Printhead printhead dots printhead Replacement” on page 109 EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 114 Shaft adjustment Adjustment” on page 1231 Incorrect edge Adjust “Media Load” guide adjustment on page 25 Too strong Adjust “Printhead printhead Pressure pressure Adjustment” on page 121 EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 115 Media Guides” on page 107 Faulty sensors Replace Call Service Compressed text Too high speed Lower print “Media” on or bar code for large media speed page 56 roll EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 116: Maintenance

    • Printhead Cleaning • External Cleaning • Cleaning the Media Guides • Printhead Replacement • Media Jams When cleaning or replacing the printhead, take ample precautions to avoid electrostatic discharges. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 117: Printhead Cleaning

    Isopropyl alcohol [(CH 3)2CHOH; CAS 67-63-0] is a highly flammable, moderately toxic, and mildly irritating substance. To clean the printhead 1 Open the side door. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 118 2 Turn the printhead lift lever clockwise to raise the printhead. 3 Remove any media (and ribbon). 4 Open the cleaning card envelope and pull out the cleaning card. Read the warning test. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 119 Engage the printhead (2). 6 Pull out the cleaning card (1) and raise the printhead (2). 7 Wait for approx. 30 seconds to allow the cleaning fluid to dissolve the residue. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 120 Engage the printhead (2). 9 Pull out the cleaning card. If necessary, repeat the process with a fresh cleaning card. 10 Allow the cleaned parts to dry before loading any media (and ribbon). EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 121: External Cleaning

    External Cleaning To clean the exterior 1 Always remove the power cord before cleaning! 2 Wipe external surfaces with a soft cloth slightly moistened with water or a mild detergent. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 122: Cleaning The Media Guides

    If necessary, clean the guides using a cleaning card or a soft cloth soaked with isopropyl alcohol. Do not use any other type of chemical. Be careful not to scratch the guides. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 123 Take care not to damage the cable. 2 Tilt the upper guide upwards and clean the areas marked with gray. After cleaning, reassemble in reverse order. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 124: Printhead Replacement

    While replacing the printhead, the power must be off. The firmware will not detect the new printhead resistance until the printer has been restarted. To replace the printhead 1 Open the side door. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 125 2 Turn the printhead lift lever clockwise to raise the printhead. 3 Remove the media (and ribbon). 4 Pull the printhead bracket away from the magnet in the pressure arm. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 126 6 Disconnect the cables from the printhead. Note the snap-lock on the inner connector. Pull at the connectors - not at the cables! Snap-lock 7 Connect the two cables to replacement printhead. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 127 9 Turn the printhead lift lever counterclockwise, so the magnet engages the printhead bracket. 10 Load a new supply of media (and ribbon), as described earlier in this manual. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 128: Media Jams

    • Reload the media as described in “Media Load” on page • Switch on the power. • Readjust the media feed by pressing the Feed key. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 129 Chapter 11 — Maintenance EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 130: Adjustments

    The chapter covers the following topics: • Narrow Media Adjustment • Label Stop Sensor Position Adjustment • Printhead Pressure Adjustment • Ribbon Break Shaft Adjustment • Quick-Load Guides Installation • Label Taken Sensor Adjustment EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 131: Narrow Media Adjustment

    If the arm is hard to move, lift the printhead and pull the printhead bracket free from the magnet in the arm. 3 After having centered the arm, lock it by tightening the screw. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 132 Chapter 12 — Adjustments Screw Pressure arm Center of media EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 133: Label Stop Sensor (Lss) Position Adjustment

    0.118 inches Two clicks out 8 mm 0.315 inches Three clicks out 12 mm 0.472 inches Four clicks out 16 mm 0.639 inches Five clicks out 20 mm 0.787 inches EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 134 LSS Manual is primarily intended for service and is not described in this manual. LSS Auto • Check that the printer is set up for the type of media loaded in your printer (Setup Mode/Media/Media type/LABELS EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 135 • It is possible to refresh the centered cursor position by pressing the /F4 key. • If the cursor behaves as described above, the LSS is working and is properly aligned with the gaps, slots, or black marks. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 136: Printhead Pressure Adjustment

    Repeat until the desired result is obtained. To return to the factory setting, tighten the screw (+) as far as it goes and then loosen it (-) six full turns. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 137 Chapter 12 — Adjustments Do not use a higher printhead pressure than necessary, because it may increase the wear of the printhead and shorten its life. Adjustment screw EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 138: Ribbon Break Shaft Adjustment

    (bw) to move the outer end of the break shaft backward. Before readjusting the break shaft, make sure that there is no other cause for the wrinkling of the ribbon. (See “Troubleshooting List” on page EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 139: Installing The Quick-Load Guides

    The standard ring-shaped edge guide is used when you want to load the media from the side rather than from behind and is necessary for peel-off operation EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 140 (save it for later use). 2 Press the quick-load guides onto the shaft as illustrated, making sure that the notches fir the rail at the rear of the lower media guide. Rail Notch EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 141: Label Taken Sensor (Lts) Adjustment

    LTS works properly. Then press Enter to stop and exit. LTS Value Press Enter. You can enter a new value in the range indicated in the LTS Adjust menu. Min/max values are in the range 0 to 10. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 142: Technical Specifications

    This appendix lists the technical data for the printer. Please note that Intermec reserves the right to change without prior notice and that this information does not represent a commitment on the part of Intermec. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 143: Technical Data

    Diameter (inner) Print directions 1. The max. print length is also restricted by the amount of free SDRAM memory. Modes of Operation Tear-Off (Straight-through) Peel-Off (Self-strip) Optional With liner takeup unit EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 144 1 socket for 8MB or Std. 8MB 16MB Power Supply AC Voltage 90 to 265 VAC, 45 to 65 Hz PFC Regulation IEC 61000-3-2 Power Consumption Standby 15W; Peak 300W EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 145 Replaces supply post 3-inch Adapter Option Short Side Door Option Long Side Door Option Label Taken Sensor Option Real Time Clock Option 10+ years life RS-232 Cable Option Parallel Interface Cable Option EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 146 EasyLAN Wireless Interface Option CompactFlash Card Protection Option Plate CompactFlash Cards Option 8MB-1GB 1. Depending on model, the printer may be delivered with either a long or a short side door. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 147 Appendix A — Technical Specifications EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 148: Media Specifications

    Media Specifications This appendix specifies the physical measures for various types of media. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 149: Media Roll Size

    • Position 2: 203 mm (8.00 inches) • Position 3: 213 mm (8.38 inches) Max width: 60 mm (2.36 inches) Min. width (standard): 25 mm (2.00 inches) Min. width (quick-load): 40 mm (1.57 inches) EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 150: Media

    Maximum: 60.0 mm (2.36 inches) Minimum (standard): 25.0 mm (1.00 inches) Minimum (quick-load): 40.0 mm (1.57 inches) Media Type Setup • Fix length strip • Var length strip NON-ADHESIVE STRIP EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 151: Self-Adhesive Strip

    ⇐ ⇒ Media Width (excluding liner) Maximum: 58.4 mm (2.30 inches) Minimum: 23.8 mm (0.94 inches) Media Type Setup • Fix length strip • Var length strip SELF-ADHESIVE STRIP EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 152: Self-Adhesive Labels

    The Label Stop Sensor must be able to detect the extreme front edges of the labels. It can be moved between 5 fixed positions (see “Label Stop Sensor (LSS) Position Adjustment” on page 118). Media Type Setup • Label (with gaps) EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 153: Tickets With Gaps

    Minimum (standard): 25.0 mm (1.00 inches) Minimum (quick-load): 40.0 mm (1.57 inches) ⇐ ⇒ Copy Length Max. length between slots: depends on SDRAM size Min. length between slots: 8.0 mm (0.32 inches) EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 154 (b) and the detection slit height (e) to be larger than 7 mm (0.28 inches), that batch printing is used, and that no pull back of the media is performed. Intermec does not guarantee that such short tickets will work, but it is up to the user to test this in his unique application.

  • Page 155: Tickets With Black Mark

    Minimum: 20.0 mm (0.8 inches) Maximum: depends on SDRAM size ⇐ ⇒ LSS Detection Position Five fixed positions, see “Label Stop Sensor (LSS) Position Adjustment” on page 118. ⇐ ⇒ Black Mark Width EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 156 Note: The black mark should be non-reflective carbon black on a whitish background. Do not allow any perforations to break the edge of the media as this may cause the media to split and jam the printer. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 157 Appendix B — Media Specifications TICKETS WITH MARKS FEED DIRECTION EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 158: Interfaces

    This appendix describes the interface connectors found on the printer’s rear plate. It covers the following topics: • RS-232 Interface • USB Interface • Bar Code Wand Interface • Optional Interface Boards EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 159: Rs-232 Interface

    Data set ready Ground Data terminal ready Clear to send Request to send – Not used The external +5V is limited to 500 mA and is automatically switched off at overload. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 160: Usb Interface

    Other devices, like a keyboard and a mouse, can be connected to the same hub. If you need to connect more than one Intermec USB printer to a host, you should use different USB ports.

  • Page 161: Bar Code Wand Interface

    Bar Code Wand Interface The printer has a socket on the CPU board for connecting a bar code wand or scanner. The socket is accessible through a slot in the printer’s rear plate. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 162: Optional Interfaces

    For more demanding applications or for reading bar codes other than Code 128, choose a regular bar code scanner from Intermec’s wide product range and connect it to a serial port. Bar code wand interface (”wand:”) Optional Interfaces The printer can optionally be fitted with one of the following interface boards at the right-hand side of the printer’s rear plate.
  • Page 163 • EasyLAN Ethernet Interface (device "net1:") • EasyLAN Wireless Interface (device "net1:") Double Serial Interface Board “uart3:” RS-232, RS-422 non isolated, or 20 mA current loop “uart2:” RS-232, RS-422 non isolated, RS-422 isolated, or RS-485 EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 164 Serial/Industrial Interface Board Industrial Interface 8 digital In ports 8 digital Out ports 4 relay ports “uart2:” RS-232, RS-422 non isolated, RS-422 isolated, or RS-485 IEEE 1284 Parallel Interface Board “centronics:” EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 165 Appendix C — Interfaces EasyLAN Ethernet Interface ”net 1:” EasyLAN Wireless Interface “net1:” EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 166: Intermec Supplies

    Intermec Supplies This appendix describes the supplies offered by Intermec for use with this printer, that is, direct thermal media, thermal transfer ribbons, and receiving face materials for thermal transfer printing. EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 167: Direct Thermal Media

    Appendix D — Intermec Supplies Direct Thermal Media Intermec offers two quality grades of direct thermal media for the Easy-Coder printers: Premium Quality Top-coated media with high demands on printout quality and resistance against moisture, plasticizers, and vegetable oils. Examples:...

  • Page 168: Transfer Ribbons

    • High Performance (HP/TMX 2200, TMX 2500) transfer ribbons allow high speed printing and give a highly readable and de. ned printout on most face materials with smooth EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 169: Bar Code Directions

    Dir 1 & 3 Picket Fence Dir 2 & 4 Ladder Feed Direction EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 170: Recommended Paper Type Settings (Europe)

    HP07 TTR Coated TTR Premium TTR Premium Board Polyethylene TTR Gloss Polyethylene HP05 TTR Coated TTR Premium TTR Premium Board TTR High Gloss White TTR Polethylene 70 TTR Gloss Polyethylene EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)

  • Page 171: Recommended Paper Type Settings (North America)

    Max Rec. Print Speed Type/Speed Name Constant Factor Offset Dir 1&3 Dir 2&4 TMX 1500 Duratran II Syntran Kimdura Valeron Tag Duratran II Tag 75 TMX 2200 Duratran II Kimdura EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 172 2. Applies to printing of text, lines, boxes, images, and picket fence bar codes. 3. Applies to ladder bar codes. 4. Requires high printhead pressure (See “Printhead Pressure Adjustment” on page 121). EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 173 Appendix D — Intermec Supplies EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
  • Page 174 Intermec Technologies Corporation Corporate Headquarters 6001 36th Avenue West Everett, WA 98203 U.S.A. tel +425.348.2600 fax +425.355.9551 www.intermec.com EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version) *934-033-001* P/N 934-033-001...

Table of Contents