Intermec EasyCoder PF2i Service Manual page 225

Intermec EasyCoder PF2i, PF4i, and PF4i Compact Industrial—Service Manual
IPL only
• Six possible errors are indicated by messages in the display window:
- Printhead hot
- Paused
- Paper out
- Ribbon out
- Print head UP/Press Feed
- Open&shut cutter
Some additional errors can be returned to the host as an ASCII number by
the <BEL> command, see IPL Programming, Reference Manual.
Firmware Error
• In case the CPU is unable to access data on a given address, the internal
program will light up the red error LED regardless of any error-handling
program.
Chapter 15—Troubleshooting
(Printhead over-temperature)
(Empty/paused)
(Out of media)
(Out of transfer ribbon
(Printhead lifted)
(Cutter error)
217