Brother 09055CDN Service Manual page 69

Code 1 Code 2
32 14 The available memory space of the remote terminal is less
than that required for reception of the confidential or relay
broad-casting instruction.
32 18 Remote terminal not equipped with color function.
40 02 Illegal coding system requested.
40 03 Illegal recording width requested.
40 05 ECM requested although not allowed.
40 06 Polled while not ready.
40 07 No document to send when polled.
40 10 Nation code or manufacturer code not correct.
40 13 Polled by any other manufacturers' terminal while waiting for
secure polling.
40 17 Invalid resolution selected.
40 20 Invalid full color mode selected.
50 01 Vertical resolution capability changed after compensation of
background color.
63 01 Password plus "lower 4 digits of telephone number" not
coincident.
63 02 Password not correct.
63 03 Polling ID not correct.
74 DCN received.
80 01 Fallback impossible.
90 01 Unable to detect video signals and commands within 6
seconds after CFR is transmitted.
90 02 Received PPS containing invalid page count or block count.
A0 03 Error correction sequence not terminated even at the final
transmission speed for fallback.
A0 11 Receive buffer empty. (5-second time-out)
A0 12 Receive buffer full during operation except receiving into
memory.
A0 13 Decoding error continued on 500 lines or more.
A0 14 Decoding error continued for 15 seconds or more.
A0 15 Time-out: 13 seconds or more for one-line transmission.
A0 16 RTC not found or carrier OFF detected for 6 seconds.
A0 17 RTC found but no command detected for 60 seconds or
more.
A0 19 No video data to be sent.
Cause
2-30
Refer to:
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
2-138
Confidential