Drum Position Sensor Pcb Assy - Brother 09055CDN Service Manual

9.54 Drum Position Sensor PCB ASSY

(1) Remove the Drum coupling gear Z52 from the Top drive ASSY.
Gear position: Refer to
Note:
Be sure to align the phase before removing the gear.
(2) Disconnect the wiring of the Drum position sensor PCB ASSY.
(3) Release the two Hooks to remove the Drum position sensor PCB ASSY from the Top
drive ASSY.
Hook
Harness routing: Refer to
Drum coupling gear Z52
Top drive ASSY
Fig. 3-239
" Top drive ASSY."
Fig. 3-240
" Top Drive ASSY"
3-162
Drum coupling gear Z52
Drum position sensor PCB ASSY
Top drive ASSY
Hook
Confidential