Mp Sector Solenoid - Brother 09055CDN Service Manual

9.75 MP Sector Solenoid

(1) Disconnect the wiring of the MP sector solenoid.
(2) Remove the Taptite bind B M3x8 screw. Remove the MP sector solenoid and Solenoid
spring MP from the PF ASSY.
Taptite bind B M3x8
Assembling Note:
When assembling the MP sector solenoid, be sure to assemble it as shown in the figure
below.
MP sector solenoid
Harness routing: Refer to
Solenoid spring MP
MP sector solenoid
Fig. 3-307
MP sector lever
PF ASSY
Fig. 3-308
" PF ASSY"
3-203
PF ASSY
Confidential