Brother 09055CDN Service Manual page 339

(9) Remove the nine Taptite cup S M3x6 SR screws and Taptite bind B M4x12 screw from the
Top drive ASSY.
Taptite bind B
M4x12
FG wire under
bar rear
FG wire under bar rear
Note:
- When removing and installing the Top drive ASSY, be sure to hang the FG wire under
bar rear on the Hook of the Base frame unit as shown in the figure before removing
and installing the Top drive ASSY.
- Be sure to install the FG wire under bar rear in the Top drive ASSY when installing
the Top drive ASSY.
Top drive ASSY
Hook
Fig. 3-230
3-156
Base frame unit
Base frame unit
Taptite cup S
M3x6 SR
Confidential