Brother 09055CDN Service Manual page 586

APPENDIX 3 INSTALLING THE MAINTENANCE DRIVER
To identify machines connected to the computer via USB, the computer needs to configure the
corresponding number of virtual USB devices by a driver or software. If you connect a multiple
number of machines to your computer, the same number of virtual USB devices will be
automatically configured on your computer.
To prevent virtual USB devices from being configured without limitation, use the unique driver
installation procedure described below that enables your computer to identify machines via
one single virtual USB device.
<Procedures>
Non Touch panel model
(1) While the machine is in the ready state, press the OK button and then Start/Black button.
Next, press the
Touch panel model
(1) While the machine is in the ready state, press the COPY and SCAN buttons at the same
time, and then press the *, 2, 8, 6 and 4 buttons in this order.
(2) "
maintenance mode.
(3) Double-click "Setup.exe" of the maintenance printer driver which is saved in the
temporary folder to execute.
(4) The following screen appears, indicating the detection of device driver installation wizard.
Click Next to proceed. (Screen below is the example of Windows
button 4 times, and the machine goes into the maintenance mode.
" appears on the LCD, and the machine goes into the
App.3-1
®
XP.)
Confidential