Sensitivity Adjustment Of Density Sensor (Maintenance Mode: Code 72); Performing The Developing Bias Voltage Correction (Maintenance Mode: Code 83); Performing The Adjustment Of Inter-Color Position Alignment (Maintenance Mode: Code 66); Acquisition Of White Level Data (Maintenance Mode: Code 55) - Brother 09055CDN Service Manual

1.5 Sensitivity Adjustment of Density Sensor
(Maintenance Mode: Code 72)
Make sensitivity adjustments of the density sensor in accordance with
adjustment of density sensor" in Chapter
1.6 Performing the Developing Bias Voltage Correction
(Maintenance Mode: Code 83)
Perform developing bias voltage correction in accordance with
voltage correction" in Chapter
1.7 Performing the Adjustment of Inter-color Position
Alignment (Maintenance Mode: Code 66)
Perform adjustment of inter-color position alignment in accordance with
inter-color position alignment" in Chapter
1.8 Acquisition of White Level Data
(Maintenance Mode: Code 55)
Acquire the white level data in accordance with
Chapter 5.
1.9 Adjustment of Touch Panel
(Maintenance Mode: Code 61) (Touch Panel Model Only)
Check performance of the LCD in accordance with
Chapter 5.
1.10 Operation Check of Sensors
(Maintenance Mode: Code 32)
Check performance of the sensors in accordance with
in Chapter 5.
5.
5.
5.
"1.4.17 Acquisition of white level data" in
"1.4.18 Adjustment of touch panel" in
4-7
"1.4.25 Sensitivity
"1.4.31 Developing bias
"1.4.19 Adjustment of
"1.4.10 Operational check of sensors"
Confidential