How To Recover From Errors Of The Fuser Unit - Brother 09055CDN Service Manual

2.4

How to Recover from Errors of the Fuser Unit

How to recover from errors of the fuser unit is to use
mode.
<Operating procedure>
Non Touch panel model
(1) Press the Menu button and then the Start/Black button while the machine is in the ready
state. Next, press the
Memo: Memo:
FAX models equipped with numerical keypads can enter the maintenance mode in the
same way as conventional models; that is, by pressing the Menu, *, 2, 8, 6 and 4 buttons in
this sequence.
Touch panel model
(1) While the machine is in the ready state, press the COPY and SCAN buttons at the same
time, and then press the *, 2, 8, 6 and 4 buttons in this order.
(2) The machine beeps for one second and displays "
indicating that it is placed in the initial state of the maintenance mode, a mode in which the
machine is ready to accept entry from the buttons.
(3) To exit from the maintenance mode and switch to ready state, press the 9 button twice in
the initial state of the maintenance mode.
WARNING
When clearing an error, be sure that the fuser unit is cooled down sufficiently. If an error is
cleared while the fuser unit is not cooled down, there is a possibility that the unit might be
unable to be repaired.
Function code 99
button four times to enter the maintenance mode.
5-71
in the maintenance
" on the LCD,
Confidential