Brother 09055CDN Service Manual page 281

(5) Fold the Second side scanning CIS flat cable at the position 200 mm away from the
Second side scanning CIS side.
Fold down FFC along with the solid line
Reinforcement tape
(6) Align the Second side scanning CIS flat cable to the angle of the Rib of the FFC holder
ASSY and pass it through the FFC holder ASSY as shown in the figure below, and then
affix it to the double-sided adhesive tape affixed to the FFC holder ASSY.
FFC holder ASSY
Second side scanning CIS flat cable
Second side scanning CIS flat cable
200 mm
Fig. 3-123
Pass the harness through here.
Fig. 3-124
3-98
Rib (Align the folded area to this part.)
Reinforcement plate
FFC holder ASSY
Affix it to the double-sided
adhesive tape.
Second side scanning
CIS flat cable
Confidential