Brother 09055CDN Service Manual page 65

Error message
No Tray
No Waste Toner
Out of Memory
Registration
(Registration Failed)
Replace Belt
Replace Drum
Description
The paper tray 1 is not installed before
printing. (The cassette of the T1 paper
edge sensor is open.)
The paper tray 1 is not installed.
The paper tray 2 is not installed before
printing. (The cassette of the T2 paper
edge sensor is open.)
The paper tray 2 is not installed.
The waste toner box is not installed.
Insufficient memory.
RAM area for secure data full.
Inter-color position alignment adjustment
failure.
(Error, which cannot be recorded, occurs.)
Inter-color position alignment adjustment
failure.
(Toner of the color which is being used
reached the end of life.)
Inter-color position alignment adjustment
failure.
(Incorrect measurement value of inter-color
position alignment adjustment.)
Error in the adjustment of inter-color
position alignment result when
implementing it.
Detection of incorrect registration sensor
measurement value when implementing
adjustment of inter-color position
alignment.
Toner of the color which is being used
reaches the end of life when implementing
adjustment of inter-color position
alignment.
Belt unit is at the end of life.
(The operation is stopped.)
Drum unit is at the end of life.
2-26
Error Refer
codes to:
17 2-35
85 2-67
18 2-35
86 2-67
CE 2-91
C7 2-88
C8 2-88
10 2-33
11 2-33
12 2-34
8E 2-72
9D 2-75
9E 2-75
7E 2-64
19 2-36
Confidential