Brother 09055CDN Service Manual page 571

(44) Remove the five Taptite cup S M3x6 SR screws to remove the four Scanner holders.
Taptite cup S M3x6 SR
Scanner holder
Base frame unit
(45) Remove the Connector (CN8) and two Flat cables from the Laser unit to remove the
Laser unit from the Base frame unit.
Laser unit
Flat cable
Flat cable
Assembling Note:
When connecting flat cable(s), do not insert them at an angle. After insertion, check
that the cable are not at an angle.
(46) After replacing the Laser unit, reset the counter. (Refer to
in Chapter 5.)
Taptite cup S
M3x6 SR
Scanner holder
Fig. 7-86
45a
45a
Fig. 7-87
7-47
Taptite cup S M3x6 SR
Scanner holder
Taptite cup S M3x6 SR
Scanner holder
45b
Connector
<Front>
"2.2 Parts Life Reset Function"
Taptite cup S M3x6 SR
Scanner holder
Laser unit
<Front>
Base frame unit
Confidential