Error Cause And Remedy - Brother 09055CDN Service Manual

3.4

Error Cause and Remedy

Check the User Check items first. If an error cannot be resolved, follow the procedures in
numerical order in the Step field.
■ Error code 0B
---
Touch panel no response error.
Error code 0E
---
Touch panel failure upon start-up of the machine.
<User Check>
- Turn OFF the power switch, and turn it ON again after a while.
Step
1
2
3
■ Error code 0F
Duplex Disabled
Close the Back Cover of the machine.
The back cover is open upon duplex printing. (The back cover sensor is OFF.)
< >
User Check
- Close the back cover.
Step
1
2
3
4
Cause
Harness connection failure of
LCD unit
LCD unit failure
Main PCB failure
Cause
Harness connection failure of
back cover sensor
Back cover damaged
Back cover sensor failure
Main PCB failure
Check the harness connection of the
LCD unit and reconnect it.
Replace the touch panel ASSY.
Replace the main PCB ASSY.
Check the harness connection of the
back cover sensor ASSY and reconnect it.
Replace the back cover.
Replace the back cover sensor ASSY.
Replace the main PCB ASSY.
2-32
Remedy
Remedy
Confidential