Drum Cleaning - Brother 09055CDN Service Manual

2.5

Drum Cleaning

■ Drum cleaning function overview
This function is to attach a special cleaning sheet on the drum and perform the cleaning of the
drum.
<Operating procedure>
Non Touch panel model
(1) Press the Clear button and
"Drum Cleaning/Attach the cleaning sheet. Please refer to the included instructions." is
displayed on the LCD.
Touch panel model
(1) Press the Job Cancel and Start/Black buttons while the machine is in the ready state.
"Drum Cleaning/Attach the cleaning sheet. Please refer to the included instructions." is
displayed on the LCD.
(2) Open the front cover, take out the drum unit, and attach the cleaning sheet on the drum
unit. (For the method of attaching the cleaning sheet, refer to the insertion of the cleaning
sheet.)
(3) Mount the drum unit to the machine and close the front cover.
"Drum Cleaning/Please wait" is displayed on the LCD, and then drum cleaning starts.
(4) After a while, "Drum Cleaning/Drum Cleaning completed. Remove the cleaning sheet." is
displayed on the LCD, and drum cleaning is completed. Then, open the front cover, take
out the drum unit, and remove the cleaning sheet from the drum unit.
(5) Mount the drum unit to the machine and close the front cover, and the machine goes back
to the ready state.
Note:
If the machine is not operated for 1 minute while it is in the state of the procedure (1), it
goes back to the ready state.
button while the machine is in the ready state.
5-72
Confidential