Exit From The Maintenance Mode (Function Code 99) - Brother 09055CDN Service Manual

1.4.34 Exit from the maintenance mode (Function code 99)

<Function>
This function allows you to exit from the maintenance mode. If the error related to the fuser
unit occurs, the error is cleared. (Refer to
in this chapter.)
<Operating procedure>
(1) Press the 9 button twice in the initial state of the maintenance mode. The maintenance
mode exits from the maintenance mode and return to the ready state.
Note:
When a fuser error occurs, be sure to turn ON the power after cooling the halogen
heater sufficiently.
"2.4 How to Recover from Errors of the Fuser Unit"
5-67
Confidential