Figure 4-2 Node Board Installation - Silicon Graphics Altix XE320 User Manual

Node board 1
power connector
Node board 1
auxiliary power connector
for SATA backplane
2
1
007-5466-001
For node board 2 (installed on the right side of the chassis):
1. Connect the power cable to the secondary ATX power header on the left side of the node
board.
2. Connect the auxiliary power cable to the power connector on right side of the SATA
backplane.
5 screws
2
1
Figure 4-2
Node Board Installation
Node board 2
power connector
Node board 2
auxiliary power connector
for SATA backplane
Node Board Installation
SATA connectors
Fan connectors
33