I/O Ports; Processor And Heatsink Installation And Removal; Figure 4-4 I/O Port Locations - Silicon Graphics Altix XE320 User Manual

I/O Ports

USB 0/1 Ports

Processor and Heatsink Installation and Removal

!
!
!
007-5466-001
The I/O ports are color coded. Figure 4-4 shows the color and location of the various I/O ports on
the I/O panel.
LAN 1 LAN 2
COM2 Port
(Turquiose)
Figure 4-4 I/O Port Locations
Caution: When handling the processor, avoid placing direct pressure on the label area of the fan.
Caution: Do not place the node board on a conductive surface. A conductive surface can damage
the BIOS battery and prevent the system from booting. Always place the node board on an
ESD-safe worksurface.
Caution: Always disconnect the power before adding, removing or changing any hardware
components. Make sure that you install the processor into the CPU socket before you install the
heatsink and fan. The node board can support either one or two processors. If installing one
processor only, install it into CPU socket 2. The DIMMs run significantly cooler using socket 2
rather than socket 1.
InfiniBand Port
VGA Port
(Blue)
I/O Ports
35