Install The Rails; Figure 2-1 Identify Sections Of The Rack Rails (Right Side Rail Shown); Figure 2-2 Rail Assembly - Silicon Graphics Altix XE320 User Manual

Install the Rails

Inner rail (pre-installed)
007-5466-001
Perform the following procedure to install the inner rails:
1. If the left and right side inner rails (refer to Figure 2-1) have not been pre-attached to the
chassis, attach them.
Figure 2-1
Identify Sections of the Rack Rails (right side rail shown)
2. Assemble one of the rails that attaches to the rack. (Refer to Figure 2-2.)
Figure 2-2 Rail Assembly
Outer rail (attaches to rack)
Locking tab
Install the System into a Rack
13